12m 120w Solar Street Light With Gel Battery

Short Description:

Power: 120W

Material: Die-cast Aluminum

LED Chip: Luxeon 3030

Light Efficiency: >100lm/W

CCT: 3000-6500k

Viewing Angle: 120°

IP: 65

Working Environment: 30℃~+70℃

Send email to us

Product Detail

Product Tags

PRODUCT ADVANTAGES

1. Convenient equipment

When installing solar street lights, there is no need to lay messy lines, just make a cement base and fix it with galvanized bolts, which saves the messy work procedures in the construction of city circuit lights. And there is no concern about power outages.

2. Low cost

One-time investment and long-term benefits for solar street lamps, because the lines are simple, there is no maintenance cost, and no precious electricity bills. The cost will be recovered in 6-7 years, and more than 1 million electricity and maintenance costs will be saved in the next 3-4 years.

3. Safe and reliable

Because solar street lamps use 12-24V low voltage, the voltage is stable, the work is reliable, and there is no safety hazard.

4. Energy saving and environmental protection

Solar street lamps use the natural natural light source sunlight, which reduces the consumption of electric energy; and solar street lamps are pollution-free and radiation-free, and are green lighting products advocated by the state.

5. Long life

Solar street light products have high technological content, and the service life of each battery component is more than 10 years, which is much higher than that of ordinary electric lamps.

INSTALLATION VIDEO

12M 120W SOLAR LED STREET LIGHT

Power	120W
Material	Die-cast Aluminum
LED Chip	Luxeon 3030
Light Efficiency	>100lm/W
CCT:	3000-6500k
Viewing Angle：	120°
IP	65
Working Environment:	30℃~+70℃

12M 120W SOLAR LED STREET LIGHT

Power	120W
Material	Die-cast Aluminum
LED Chip	Luxeon 3030
Light Efficiency	>100lm/W
CCT:	3000-6500k
Viewing Angle：	120°
IP	65
Working Environment:	30℃~+70℃

MONO SOLAR PANEL

Module	180W*2
Encapsulation	Glass/EVA/Cells/EVA/TPT
Efficiency of solar cells	18%
Tolerance	±3%
Voltage at max power(VMP)	36V
Current at max power(IMP)	5.13A
Open circuit voltage(VOC)	42V
Short circuit current(ISC)	5.54A
Diodes	1by-pass
Protection Class	IP65
Operate temp.scope	-40/+70℃
Relative humidity	0 to 1005

BATTERY

Rated Voltage	12V
Rated Capacity	110 Ah*2pcs
Approximate Weight(kg,±3%)	30KG*2pcs
Terminal	Cable（2.5mm²×2 m）
Maximum Charge Current	10 A
Ambient Temperature	-35~55 ℃
Dimension	Length (mm,±3%)	406mm
	Width (mm,±3%)	174mm
	Height (mm,±3%)	208mm
Case	ABS

15A 24V SOLAR CONTROLLER

Rated working voltage	15A DC24V
Max. discharging current	15A
Max. charging current	15A
Output voltage range	Max panel/ 24V 600WP solar panel
The precision of constant current	≤3%
Constant current efficiency	96%
levels of protection	IP67
no-load current	≤5mA
Over-charging voltage protection	24V
Over-discharging voltage protection	24V
Exit over-discharging voltage protection	24V
Size	607622MM
Weight	168g

POLE

Material	Q235
Height	12M
Diameter	110/230mm
Thickness	4.5mm
Light Arm	602.51500mm
Anchor Bolt	4-M22-1200mm
Flange	45045020mm
Surface Treatment	Hot dip galvanized+ Powder Coating
Warranty	20 Years

PRODUCT MAINTENANCE

1. The solar panel is the key component to provide energy for the solar street lighting system, so it is necessary to ensure that the solar panel is complete, clean and good in light collection. To prevent the solar panel from being damaged by hard or sharp objects, it is forbidden to throw debris on the solar panel, clean and check regularly, and trim the branches that block the solar panel in time.

2. When it is windy, rainy or snowy, check immediately whether the equipment is working normally, whether the charge and discharge controller is damaged, etc.

3. The solar street light source should be checked daily. First of all, it is necessary to strictly prohibit the impact of hard objects and sharp objects. At the same time, check the working status of the light source frequently. Once a few lamp beads are found to be off, repair them in time to avoid damage to the entire lamp.

4. When the weather is bad, check whether the connection wire of the battery board and the ground wire are in good contact and whether there is any falling off phenomenon. Check whether the battery board bracket is loose or broken.

OUR ADVANTAGES

-Strict Quality Control
Our factory and products are in compliance with most international standards, like List ISO9001 and ISO14001. We only use high-quality components for our products, and our experienced QC team inspects each solar system with more than 16 tests before our customers receive them.

-Vertical Production of All Main Components
We produce the solar panels, lithium batteries, led lamps, lighting poles, inverters all by ourselves, so that we can ensure a competitive price, faster delivery and faster technical support.

-Timely and Efficient Customer Service
Available 24/7 via email, WhatsApp, Wechat and over the phone, we serve our customers with a team of salespeople and engineers. A strong technical background plus good multilingual communication skills enable us to give quick answers to most of the customers’ technical questions. Our service team always flies to the customers and gives them technical support onsite.